International norms (NILECJ-0601 L1-5/IP44/EN60950 Class1) In conformity with CE European Union Norms and produced under ISO 9001: 2015 QMS
Certified in Compliance to EN 61000-6-3, EN 61000-6-1 regulations and in compliance with DIRECTIVE 2002/95/EC (restriction of the use of certain hazardous substances in electrical and electronic equipment)
Whilst Normal Operation, displays IN/OUT Counters and Security Level on LCD without abbreviations so that Security Sta ts can easily understand
Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By
Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. Can detect when tested both individually and in combination.
Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.
No Interference between Zones and No False Alarms
Multi-Zone - 9 Real Matrix Detection Zones(Up/Middle/Down and Left/Middle/Right)
Audio and Visual Alarm
Displays Location of the Detected Metal Objects with Continuous LED Zone Indicators on Both Side Panels from top to bottom
Separate Sensitivity Settings for Different Detection Zones
Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top
Detects Metals regardless their orientation
20 sensitivity levels, 246 adjustable sensitivity steps at each, Preset NILECJ Sensitivity Program, - 7 Preset Security Programs
Automatic Frequency Selection Feature
Metal Density Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance
Superior Discrimination, Pin Point target location identification with Graphical zone display on Control Unit
Human Health friendly Very Low Frequency VLF technology, No reacts to Pace Makers, Pregnant and Magnetic Media
Green/Red bi-colour track through LED's, easily allows sight from distance
60 Persons/Minute and LED Alarm Indicators side panels
Operation Mode, Programming Parameters and Error Codes are Displayed on Wide 64x128 Characters GLCD Screen
Real Time Environmental Magnetic Noise Level Display
10 Adjustable audio tones with 10 volume levels (enabling Mute Operation) Adjustable Alarm Duration
IR Protection Feature enabling perfect low false alarm operation/ Continuous Detection Mode Selection Enabled
IP 44 (Optional IP 65) Protection Level (EN 60529)
Five Digit Incoming/ Outgoing & Alarm Counters (Visible/Invisible)
Interference free Operation from other Electronic Equipment. Necessary altering precautions have been taken
Four-digit changeable digital Pin Code and Mechanical Lock
Automatic Failure Display Function on GLCD with continuous self checking of key parameters (BITE - Built In test Equipment)
Reloading the factory default settings by one-touch button
Easy Programming and Display via High Resolution GLCD (Graphical Liquid Crystal Display)
5 Menu Languages, Standard menu in English, German, Spanish, Turkish and Arabic
Relay output for recording CCTV, Photo Recording, controlling turnstiles, etc.
Built in Uninterrupted Power Supply (UPS) system backup for 2 hrs
Battery ON/OFF Feature enabling Operation Without Mains
Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design
Manufactured for 7/24 Continuous Operation
74 cm Net Passage Width and 200 cm Net Passage Height
Interference free Operation at Middle Level Sensitivity of 10 cm stagnate Metals and 200 cm distance moving.
Installation and Operation without interference between two detectors up to a distance of min. 5 cm
Audio-Visual alarms are noticeable at a range of 4 meters
Micro-Processor Settings do not change when there is an electricity cut-o ff
No interference with Storage Media, Flash Memories, CD, Diskettes and other electronic devices
All Electronic Units (electronic unit, power supply, battery, adapter etc..) are inside the Equipment. No external units.
Strong plastic footers for sturdy placement and durable use.
Optional -SCADA Networking for Multiple Metal Detectors; Change settings by PC (Digital output for Network Connection)
Optional REAL-TIME VIDEO PROSECUTION UNIT enabling recording of Alarmed Visitors Pictures/All Visitors pictures or video with Time-Stamp to SD Card ~30.000 Images
Optional IRDA (Pilot) Remote Control Unit
Technical Features: Package Dimensions (W x L x H)
Ambient Temperature: -20°C to +70°C Box 1: 81 x 235 x 21 cm (65 kg)
Operating voltage: 70VAC – 270VAC / 50Hz - 60Hz Box 2: 43 х 81 х 27 cm(14 Kg)
Power: 10W Stand By- 20W (Alarm) Net Weight: 61 Kg
Net Passage: 74 x 68 x 200 cm External: 85 x 68 x 220 cm Gross Weight: 79 Kg